have a machine irc 2550 it gave E602-001 put a new HDD cant format or put firm error
pls need instruction from any old copier expert
thanks
have a machine irc 2550 it gave E602-001 put a new HDD cant format or put firm error
pls need instruction from any old copier expert
thanks
Hello this message will be if HDD serial number isnt on the sst filter list...try to modificate list..
First did you fit a Canon HDD or just any one? It needs to me the correct one or you wont be able to install the system software. I buy an identical one from eBay.
Next you install the firmware onto the SST tool, create a USB boot stick put this into the copier, start the copier in safe mode then you get the option to format & install the software.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
==================================================
u need OEM Canon HDD----------
a SATA HDD will require additional hardware to fit in product
see attachment--------- Adoption of the SATA Hard Disk Drive
FM4-4379-000 1 HDD, WD800JB PATA HDD
CZG,CZS,CZU,DBC,DBM
FK2-8352-000 1 HDD, ST3160316CS SATA HDD
CZH,CZJ,CZK,CZR,CZT,\nCZY,CZZ,DAH,DAZ,DBB,
\nDBD,DBE,DBF,DBG,DBN,\nDBT,DBU,DBV,DBW,DBX,
\nDBY,DBZ,DCA,DCE,DCF,\nDCK,DCL,DCM,DCP,DCQ
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks