Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    May 2011
    Posts
    41
    Rep Power
    27

    Constant display.close right unit main cover in it 2870

    I have a big problem with an 2270 go, I get the message constantly RIGHT SIDE DOOR CLOSE RAND I changed the door switch, I changed the Power Supply, the Dc controller and all plates have the machine, I measured at j309 conector that reach the 24v and go, luckily have another well for testing, but the result is the same, the message remains
    It is a very rare breakdown, please apply for help
    Last edited by aakash@24; 08-11-2017 at 08:52 AM.

  2. #2
    Service Manager 5,000+ Posts
    Constant display.close right unit main cover in it 2870

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Constant display.close right unit main cover in it 2870

    Quote Originally Posted by aakash@24 View Post
    I have a big problem with an 2270 go, I get the message constantly RIGHT SIDE DOOR CLOSE RAND I changed the door switch, I changed the Power Supply, the Dc controller and all plates have the machine, I measured at j309 conector that reach the 24v and go, luckily have another well for testing, but the result is the same, the message remains
    It is a very rare breakdown, please apply for help
    Wow is this the same issue from 2010 !!!!????

    Message constant open door Ir2270
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    Technician
    Join Date
    May 2011
    Posts
    41
    Rep Power
    27

    Re: Constant display.close right unit main cover in it 2870

    Quote Originally Posted by copier tech View Post
    Wow is this the same issue from 2010 !!!!????

    Message constant open door Ir2270
    yeah facing same problem.
    Changed all boards and supplies but keep getting same issue.
    Any suggestions.
    Machine first showed e00227 then after replacing main power supply it got resolved and I got this code.
    I have interchanged all the boards with another one and they are all fine .

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here