Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 250+ Posts
    advanced 5045 skew


    Join Date
    Apr 2008
    Location
    las vegas,nv.
    Posts
    390
    Rep Power
    0

    advanced 5045 skew

    I have a Canon ir 5045 that skews from all paper sources when copying or printing. couldnt find anything in the service manual for skews from cassette or image formation, ie lasers. since the skew is identical from all sources i think it has to do with lasers any suggestions. Thanks


  2. #2
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,477
    Rep Power
    42

    Re: advanced 5045 skew

    I personally doubt if its laser...two separate lasers in this product and odds of 2 going bad...unlikely. Check the registration area...common to all paper trays.


  3. #3
    Senior Tech 250+ Posts madas's Avatar
    Join Date
    Aug 2008
    Location
    NZ
    Posts
    315
    Rep Power
    22

    Re: advanced 5045 skew

    Do an A3 test chart I think 5 or 6 grid and jam the machine by opening the door and check image on the belt.
    also try each colour individually if you have not done that and see if it is just one colour?

    if you jam and the image on the belt is ok then not lasers if not ok then possibly try swapping transfer belt, i agree with canuck, unlikely both lasers are screwed but could go deeper and be some form of laser control thing but not had it personally.

    just some ideas to look at.

    madas


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here