Help!! iR C3080 Machine

[zoraldinho]

Just looking at it, looks like the Cyan unit is bad, maybe), looking at the other colors, they look fine, black, magenta, yellow look good, just the cyan has a small line on top and then the lines more in middle, but just the cyan. Have seen weird copies when just scanning/copying, the lens had some cleaner that had hardened and causing the images come out with strange colored lines, eventually we had to change the lens, took care of problem. Good Luck.

Zoom a pic!Stripes are on all colours!

Did you replace a ribbon cable?

[tech28]

After taking a second look, yes its on all colors, also see the printouts under that one which is black, also on those, on top as well as in the middle. Optical problem.

[q555]

hi good day,

update:

CCD replaced = same issue (no bend)
Board replaced = same issue
Photocopy & scan = same output
PG test print = working perfectly fine
Print = working perfectly fine
Have tried also using other ribbons = same issue

already puzzled with this machine, ahahahaha

[zoraldinho]

Any update?

[q555]

No update yet with this kind of issue.

We already replaced the machine for the meantime, and this machine is under obrservation here in our office.

I will update as soon as possible.

[copier tech]

If you have a doner machine swap the complete scanner unit!?

[q555]

If you have a doner machine swap the complete scanner unit!?

i will try this one definitely.

And i will try this assembly to other machines also.

i will update as soon as possible.

[petermays]

hi..has this been sorted yet?there should be a closed button so if problem has been sorted we all know..if it hasn't and looking at all whats been done then it could be a processing problem.pcb in main pcb.pls let me know if prob has been sorted

thank you

[jitenderrawat1]

PG Test 10 is working perfectly fine.

But both Glass and Feeder Scan is not, there is a straight light output.

Anyone have encountered this kind of problem in iR C3080 machines?

Thanks in Advance!!!

Clean the ccd sliding rod and oil in it then move 2 or 3 times. Try copying it best of luck



Sent from my CPH1701 using Tapatalk