Hi Guys and Gals
Anyone have a problem on last few inches of an A3 sheet that wrinkles intermittently. I remember going back a few ago about a setting in the fuser service mode or is this just a distant memory?
Hi Guys and Gals
Anyone have a problem on last few inches of an A3 sheet that wrinkles intermittently. I remember going back a few ago about a setting in the fuser service mode or is this just a distant memory?
Hi!
Semething like:(COPIER>ADJUST>FIXING>FX-FL-SP) set to 3
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Thanks for info alas there is no fuser speed adj in the service mode. There was a spring loaded guide for deflecting the paper out that used to have black sponge pads but were modified to white and this machine was modified. The guide used to stick with the old pads and this did cause wrinkles problem seems like paper is been pulled from rollers or a guide that does not operate hence the wrinkles
Yes, This model have different tipe of settings for Speed control for the fixing motor (M3).
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Plz change delivery rubbers.
Sent from my CPH1701 using Tapatalk
Might be but my money is on the skinny orange fuser roller. If not that fuser unit refurb time.
Plz add some doctor tape in delivering rubbers.
Sent from my CPH1701 using Tapatalk
Bookmarks