Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    May 2015
    Location
    Dubai
    Posts
    64
    Rep Power
    5

    Help!! iR C3080 Machine

    Kindly Check Image for your reference.

    second image was when i replaced the registration clutch, but there is still slight fold in the middle.

    how to resolve this issue?

    thanks

    Attached Images Attached Images

  2. #2
    teacher-guide-expert-guru 2,500+ Posts
    Help!! iR C3080 Machine

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,079
    Rep Power
    75

    Re: Help!! iR C3080 Machine

    Only first one or two prints or always?

    First start with fresh,dry paper.
    Inspect and lubricate thin orange roller in fixing unit.
    Inspect>remove>foam dumpers.
    Clean or replace pickups and feed rollers.

    Last edited by zoraldinho; 09-12-2017 at 02:10 PM.
    Practice makes perfect
    If it ain't broke, don't fix it
    There's no such thing as a free lunch
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  3. #3
    Senior Tech 100+ Posts
    Help!! iR C3080 Machine


    Join Date
    Jun 2013
    Location
    WI
    Posts
    187
    Rep Power
    10

    Re: Help!! iR C3080 Machine

    Internal finisher? No finisher? Check switch right before sync roller, steel cover on switch, guild plate out of alignment. just a couple of thing to also check.


  4. #4
    Trusted Tech 50+ Posts
    Join Date
    May 2015
    Location
    Dubai
    Posts
    64
    Rep Power
    5

    Re: Help!! iR C3080 Machine

    Quote Originally Posted by zoraldinho View Post
    Only first one or two prints or always?

    First start with fresh,dry paper.
    Inspect and lubricate thin orange roller in fixing unit.
    Inspect>remove>foam dumpers.
    Clean or replace pickups and feed rollers.
    when i haven't change the registration clutch, every output is the first picture.

    after replacing the registration clutch, second picture was the output.


  5. #5
    Trusted Tech 50+ Posts
    Join Date
    May 2015
    Location
    Dubai
    Posts
    64
    Rep Power
    5

    Re: Help!! iR C3080 Machine

    Quote Originally Posted by tech28 View Post
    Internal finisher? No finisher? Check switch right before sync roller, steel cover on switch, guild plate out of alignment. just a couple of thing to also check.

    the machine is without inner finisher. i have tried also remove the plate, and reseated it. i've also cleaned some parts.

    what else can you recommend?

    thanks


  6. #6
    teacher-guide-expert-guru 2,500+ Posts
    Help!! iR C3080 Machine

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,079
    Rep Power
    75

    Re: Help!! iR C3080 Machine

    Quote Originally Posted by q555 View Post
    when i haven't change the registration clutch, every output is the first picture.

    after replacing the registration clutch, second picture was the output.

    I understood you the first time.Don't make me to come on philippines! This model have many reasons for this kind of problem.With new clutch you eliminate 80% of problems.Did you check things from my previous post?

    Practice makes perfect
    If it ain't broke, don't fix it
    There's no such thing as a free lunch
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  7. #7
    Trusted Tech 50+ Posts
    Join Date
    May 2015
    Location
    Dubai
    Posts
    64
    Rep Power
    5

    Re: Help!! iR C3080 Machine

    Quote Originally Posted by zoraldinho View Post
    I understood you the first time.This model have many reasons for this kind of problem.With new clutch you eliminate 80% of problems.Did you check things from my previous post?

    i havent' check your post. Kindly post the link here, please? Thank you so much.


  8. #8
    Trusted Tech 50+ Posts techandtrader's Avatar
    Join Date
    Jun 2016
    Location
    Oklahoma City OK
    Posts
    66
    Rep Power
    3

    Re: Help!! iR C3080 Machine

    Most likely Fuser unit. Before you change it. Open the fuser and put a drop of oil on the ends of the skinny orange roller. This is on the outside guide. If you want to do it by the book, remove the assembly and apply conductive grease to the ends. This pencil size roller can cause a drag on the paper and make the bends.

    If that doesnt work its time for a new fuser.


  9. #9
    Trusted Tech 50+ Posts
    Join Date
    May 2015
    Location
    Dubai
    Posts
    64
    Rep Power
    5

    Re: Help!! iR C3080 Machine

    hi good day.

    we have recently changed the fixing unit.

    second picture is still the output.


  10. #10
    Trusted Tech 50+ Posts techandtrader's Avatar
    Join Date
    Jun 2016
    Location
    Oklahoma City OK
    Posts
    66
    Rep Power
    3

    Re: Help!! iR C3080 Machine

    Can you make a copy through the manual feed without any noise or studder? Is the lower door hinge cracked or loose.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here