Dear/Copytechteam
please i want your help to solve the problem that original paper exits from DADF-S1 as shown in picture when make copy
Photo0752[1].jpg
thanks
akm
Dear/Copytechteam
please i want your help to solve the problem that original paper exits from DADF-S1 as shown in picture when make copy
Photo0752[1].jpg
thanks
akm
The height of the dadf is not correct.
Make sure the white platen roller on the feeder is seated properly on the glass.
Performing a hinge adjustment on the feeder hinges should resolve the dog eared originals.
DADF-S1 height adj.jpgDADF-S1 height adj.jpg
Also check for --worn guides in the document feeder.
The parts can be found in the imageRUNNER 5075 parts manual figure A40, item 106 and 105.
Fl2-5982-000 Guide delivery lower
FC7-2756-000 Flapper, Paper feeder
================================================== =======================
(DADF-S1)
In some cases, replacing the DADF Lower Delivery Guide (part number FL2-5982-000) in the DADF Paper Feeder Assembly resolved the service issue of dog ears occurring on originals when originals are fed through the DADF.
Refer to the following illustration for location of the DADF Lower Delivery Guide in the DADF Paper Feeder Assembly.
Last edited by teckat; 09-16-2017 at 06:12 AM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks