Quote Originally Posted by onlyinnewfoundland View Post
The fiery will say that if the main unit is off - so I think you're okay from that standpoint.

You must have something either connected wrong, or there is a remote signal not getting through the system.

I would check out your power station and confirm the voltages at each board...

You're probably not getting the 12V signal to turn on the DC controller power supply.

Do you have the manual for this badboy? I might have the wiring diagram scanned somewhere if you need it. A bit more tangly than a regular copier lol.
Hey onlyinnewfoundland

I need the wiring diagram. Could you send me? I will install a Canon imagepress c7000vp... Hope Ypu can provide me with that...