Check PM...
Johan
Does anyone here have the firmware for Canon Imagerunner 2020 that is willing to share with me?
I've had a couple of these. In both cases it was the Main Controller 1. Replaced this board, and hey presto, back to life. But you can only fit a new one, and it must be the specific model, as they are locked to speed and set the serial number when powered on.
Fig.930 FM4-3139-010 1 MAIN CONTROLLER PCB ASS'Y, 1 C2020 SERIES
Fig.930 FM4-3140-010 1 MAIN CONTROLLER PCB ASS'Y, 1 C2025 SERIES
Fig.930 FM4-3141-010 1 MAIN CONTROLLER PCB ASS'Y, 1 C2030 SERIES
Also had same fault on IrAdv4025, and IrAdvC5051 which was also Main Controller 1 on both counts .... expensive hobby!
Thank You,
Now does anyone know where I can buy such a part for my Machine?
I checked the Board and it does have FM-1920 on it, but am not so sure where I can buy such a part.
I really need this machine to work, have had it down like this, not working for almost four months now.
Item inc (printer parts and supplies and rentals item inc) may have it, just google the partno to compare prices...
Johan
I don't think FM-1920 is the correct partno. I Found FM3-1920 but thats for a 2016 ?
Canon IMAGE PROCESSOR PCB ASS'Y, (IR2016 TW 120V) (FM3-1920-000000) - Mediaform Computer Supplies
Not sure if that is what you need, i'd recheck if i where you..
Johan
Bookmarks