Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: Canon ir 2535

  1. #1
    Senior Tech 100+ Posts KHAN's Avatar
    Join Date
    Aug 2006
    Location
    Peshawar
    Posts
    241
    Rep Power
    0

    Canon ir 2535

    Hello friends my Canon ir 2535 shows error E 000280 ,please how to reset this error or I have to replace any parts, I will be grateful ,Thanks


  2. #2
    Senior Tech 500+ Posts kuby's Avatar
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    697
    Rep Power
    27

    Re: Canon ir 2535

    E280
    Title Reading unit communication error

    Description Reading error after writing.
    Remedy
    1.Disconnect and then connect the flexible cable(Relay PCB

    (PCB2)-Main Controller PCB (PCB1) 50pin).

    2.Disconnect and then connect the flexible cable(Relay PCB
    (PCB2)-Main Controller PCB (PCB1) 64pin).

    3.Disconnect and then connect the flexible cable(CCD unit-
    Relay PCB (PCB2)).

    4.Replace the flexible cable.

    5.Replace the Relay PCB (PCB2).

    6.Replace the Main Controller PCB (PCB1).



  3. #3
    Senior Tech 100+ Posts KHAN's Avatar
    Join Date
    Aug 2006
    Location
    Peshawar
    Posts
    241
    Rep Power
    0

    Re: Canon ir 2535

    Thanks for your kind help &nbsp; &nbsp; &nbsp; &nbsp;<br> &nbsp;E280 0000 Title Reading unit communication error<div>Description Reading error after writing.</div><div>Remedy 1.Disconnect and then connect the flexible cable(Relay PCB</div><div>(PCB2)-Main Controller PCB (PCB1) 50pin).</div><div>2.Disconnect and then connect the flexible cable(Relay PCB</div><div>(PCB2)-Main Controller PCB (PCB1) 64pin).</div><div>3.Disconnect and then connect the flexible cable(CCD unit-</div><div>Relay PCB (PCB2)).</div><div>4.Replace the flexible cable.</div><div>5.Replace the Relay PCB (PCB2).</div><div>6.Replace the Main Controller PCB (PCB1).<br>

    but when i enter the service mode &nbsp;and check the history &nbsp;of the errors &nbsp;there i found this ERROR<br><div><strong>E197 0000 </strong>Title Error in communication of Laser Driver PCB (PCB14)</div><div>Description Communication error 1 with image PCB</div><div>Remedy 1.Check the cable.</div><div>2.Replace the Laser Scanner Unit.</div><div>3.Replace the DC Controller PCB (PCB4). so i am new with canon iR 2535 , now my question is which the actual ERROR E000280 or E 197 , i clear this error E 197 from the history but when i turned ON/OFF the copier the error still there.
    THANKS.



  4. #4
    Senior Tech 250+ Posts JPiek's Avatar
    Join Date
    Oct 2014
    Location
    The Netherlands
    Posts
    305
    Rep Power
    12

    Re: Canon ir 2535

    An error in history is just that: a previous error... in the colums behind it there shoud be a date&time when it ocurred and a date&time when it was solved.

    AFAIK you can only clear ALL errors in history, not just one. You can clear the current error, but if it isn't solved, it will come back.

    The current errorcode is always on the display, no need te go into servicemode for it. Sometimes you need to press the mainenance/settings button (the head with the asterisk)...

    Johan

  5. #5
    Senior Tech 100+ Posts KHAN's Avatar
    Join Date
    Aug 2006
    Location
    Peshawar
    Posts
    241
    Rep Power
    0

    Re: Canon ir 2535

    [QUOTE=JPiek;578485]An error in history is just that: a previous error... in the colums behind it there shoud be a date&time when it ocurred and a date&time when it was solved.

    AFAIK you can only clear ALL errors in history, not just one. You can clear the current error, but if it isn't solved, it will come back.

    The current errorcode is always on the display, no need te go into servicemode for it. Sometimes you need to press the mainenance/settings button (the head with the asterisk)...[/QUOTE

    Thanks
    I enter the service mode and select clear and then press ALL. The copier takes few seconds and reboot and then the Canon monogram with white bar appears on the screen ,when the bar comes black up to middle it's hangout more the 30min ,I trun off the copier and On it again after few minutes , but still the same.please need help,. Thanks


  6. #6
    Technician
    Join Date
    Mar 2017
    Location
    bloemfontein
    Posts
    37
    Rep Power
    2

    Re: Canon ir 2535

    hi there..IF THE SCREEN SHOWS A E280 then that's your error you need to sort out.its a communication error between scanner unit and mc.
    firstly look at ribbion cables. also there should be a sub code aswell.what is it..easier to break down the error code


  7. #7
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,491
    Rep Power
    42

    Re: Canon ir 2535

    If bar stops then machine is not totally booting. This model has a flash drive instead of hard drive so I would look at that and reflash the machine for starters


  8. #8
    Senior Tech 100+ Posts KHAN's Avatar
    Join Date
    Aug 2006
    Location
    Peshawar
    Posts
    241
    Rep Power
    0

    Re: Canon ir 2535

    Quote Originally Posted by Canuck View Post
    If bar stops then machine is not totally booting. This model has a flash drive instead of hard drive so I would look at that and reflash the machine for starters
    So I need firmware to download,or any boot application , please guide me step by step,this is my first time to work on Canon ir 2535 copier. Thanks


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here