Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    Technician
    Join Date
    Mar 2017
    Location
    bloemfontein
    Posts
    32
    Rep Power
    0

    Re: Black on IR C5030

    remove drum and swop with magenta and test to cancel out drum.can be dev aswell.so if you really want to test dev you can swop magenta and bk.1 skrew and clip.then it will fit..just put tape over inlet of toner..so bk wont mix with magenta.run 1 page of test again.instead of bk magenta will be there.if prob is still there then you have just cancelled out the dev unit.and if you already swoped magenta and bk drums and 1 page and is still there you have cancelled out drum and dev.then you must start looking at charge.


  2. #12
    Senior Tech 100+ Posts guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Murfreesboro, TN
    Posts
    173
    Rep Power
    5

    Re: Black on IR C5030

    Quote Originally Posted by petermays View Post
    remove drum and swop with magenta and test to cancel out drum.can be dev aswell.so if you really want to test dev you can swop magenta and bk.1 skrew and clip.then it will fit..just put tape over inlet of toner..so bk wont mix with magenta.run 1 page of test again.instead of bk magenta will be there.if prob is still there then you have just cancelled out the dev unit.and if you already swoped magenta and bk drums and 1 page and is still there you have cancelled out drum and dev.then you must start looking at charge.

    That won't work on the Adv C5030. The color drums can be swapped around, but the black drum is strictly black. If heavier paper is giving a quality black image, and you're only seeing light areas when print to plain (20lb) paper, I'd try a different BRAND of plain paper.


  3. #13
    Service Manager 10,000+ Posts
    Black on IR C5030

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,151
    Rep Power
    213

    Re: Black on IR C5030

    Quote Originally Posted by guitar9199 View Post
    That won't work on the Adv C5030. The color drums can be swapped around, but the black drum is strictly black. If heavier paper is giving a quality black image, and you're only seeing light areas when print to plain (20lb) paper, I'd try a different BRAND of plain paper.


    If PG5 on single colors of M C Y don't display issue, may need to rule out it's a paper issue.?

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #14
    Technician
    Join Date
    Mar 2017
    Location
    bloemfontein
    Posts
    32
    Rep Power
    0

    Re: Black on IR C5030

    Quote Originally Posted by guitar9199 View Post
    That won't work on the Adv C5030. The color drums can be swapped around, but the black drum is strictly black. If heavier paper is giving a quality black image, and you're only seeing light areas when print to plain (20lb) paper, I'd try a different BRAND of plain paper.
    hi there..yes you can swop drums.yes voltage between the bk and the colours is different but fot test purpose 1 page wont cause any issue.if you take off circlip and remove rod drum will come off.as a technician you shouldnt be a parts replacment specialist. Tests to find where problem is and coming down to the root is how we should all work.if ut was paper then again all colours will be affected.


  5. #15
    Trusted Tech 50+ Posts
    Join Date
    Aug 2016
    Location
    Muenster
    Posts
    58
    Rep Power
    3

    Re: Black on IR C5030

    the drums can not be exchanged. they are not mechanically compatible. I'm just wondering that the result on heavy paper is perfectly fine. Is there a way to re-evaluate the developer? this is also just 3000 pages old.


  6. #16
    Service Manager 10,000+ Posts
    Black on IR C5030

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,151
    Rep Power
    213

    Re: Black on IR C5030

    Quote Originally Posted by maximilian500 View Post
    the drums can not be exchanged. they are not mechanically compatible. I'm just wondering that the result on heavy paper is perfectly fine. Is there a way to re-evaluate the developer? this is also just 3000 pages old.


    Have you interchanged/swapped laser scanner assemblies between black andcyan for testing ?????

    FM4-8354-010 DEVELOPING ASSEMBLY, BLACK




    See if the
    developer
    bias tab for black is pushed in and stuck in the housing > not allowing it to make proper contact.



    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #17
    Trusted Tech 50+ Posts
    Join Date
    Aug 2016
    Location
    Muenster
    Posts
    58
    Rep Power
    3

    Re: Black on IR C5030

    I'm not currently at the machine to change the laser units.I have checked the BIAS contact and its ok.


  8. #18
    Trusted Tech 50+ Posts
    Join Date
    Aug 2016
    Location
    Muenster
    Posts
    58
    Rep Power
    3

    Re: Black on IR C5030

    Can it be the Primary Transfer Roller for Black ?


  9. #19
    Technician
    Join Date
    Mar 2017
    Location
    bloemfontein
    Posts
    32
    Rep Power
    0

    Angry Re: Black on IR C5030

    Quote Originally Posted by maximilian500 View Post
    the drums can not be exchanged. they are not mechanically compatible. I'm just wondering that the ris differentsult on heavy paper is perfectly fine. Is there a way to re-evaluate the developer? this is also just 3000 pages old.
    You a typical asshole arnt you.yes.you can take the drum out of the bk unit and put in a colour unit for testing.yes.voltages between bk and colour are differwnt but to test you can.i see you dont test units.ppl like you are a irritation.

    Yes..go get a new bk unit and go put in....aaaaa...its not the unit..now I have a open drum unit...or ill just leave it in machine.


  10. #20
    Trusted Tech 50+ Posts
    Join Date
    Aug 2016
    Location
    Muenster
    Posts
    58
    Rep Power
    3

    Re: Black on IR C5030

    I tested the following Units:
    -Black Drum (with a used one from another machine)
    -secondary Transfer Roller
    -BIAS contacts
    -Laser Unit

    I basically advise my customers honestly do not sell them anything they need.

    Quote Originally Posted by petermays View Post
    You a typical asshole arnt you.yes.you can take the drum out of the bk unit and put in a colour unit for testing.yes.voltages between bk and colour are differwnt but to test you can.i see you dont test units.ppl like you are a irritation.

    Yes..go get a new bk unit and go put in....aaaaa...its not the unit..now I have a open drum unit...or ill just leave it in machine.



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here