================================================== ===============================================
The ITB and the Drum Unit can be replaced with screw-less
operation.
Related service mode:
• Execution of the Primary Transfer Roller disengagement
COPIER > FUNCTION > MISC-P > T1-UP
Related user mode:
• Execution of ITB/Drum Unit Replacement Mode
Adjustment/Maintenance > Maintenance > ITB/Drum Unit Replacement Mode > Start
The above mode is displayed by selecting the following in service mode:
COPIER > OPTION > DSPLY-SW > ITB-DSP > 1 (default: 0)
To use the ITB replacement mode,
set the service mode (COPIER>OPTION>DSPLY- SW>ITB-DSP) (Level 1) to 1.
Since this operation makes the ITB replacement mode appear in the menu on UI, pressing
the "Start" button starts ITB disengagement operation.
COPIER > FUNCTION > MISC-P
T1-UP = Execution of all ITB disengagement mode
To disengage the ITB from the Photosensitive Drums of all colors to prevent making small cuts on the ITB when removing and then
installing theDrum Unit/ITB.
When service mode is completed, the setting value is automatically returns to 0 at the time of opening and closing the door.
Use case =
When removing and then installing/replacing the Drum Unit/ITB
Adj/set/operate method Select the item, and then press OK key.
ITB.jpg
Bookmarks