Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Technician
    Join Date
    Nov 2015
    Location
    stockholm
    Posts
    18
    Rep Power
    4

    Question Move booklet trimmer from one Imagepress to another....

    We have two Canon Image press ( C6000VP and C7000VP) and the 7000 now start do mess a lot for us, so we now like to move a booklet trimmer and two knife unit from the 7000 to the 6000 unit!
    Is there anything that have to be change in the set up on the imagepress meny or RIP to do that ??
    Thanks or any reply!
    Regards


  2. #2
    Service Manager 10,000+ Posts
    Move booklet trimmer from one Imagepress to another....

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: Move booklet trimmer from one Imagepress to another....

    27164.pdf

    Installation instructions for the 2knife trimmer.
    *Also note that the machine firmware and the trimmer C1 firmware must be flashed to the latest versions.

    Booklet Trimmer Install
    21149.pdf

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Nov 2015
    Location
    stockholm
    Posts
    18
    Rep Power
    4

    Re: Move booklet trimmer from one Imagepress to another....

    OK - thanks for the reply!
    The C6000 have had a booklet trimmer so that was easy to change , but did not have the two-way trimmer/knife and this one don´t show up on the screen ?
    How do a know what is the latest firmware ( if this is the problem) or how to flashed C1 firmware to the latest versions.
    Thanks for any reply!
    Regards


  4. #4
    Service Manager 10,000+ Posts
    Move booklet trimmer from one Imagepress to another....

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: Move booklet trimmer from one Imagepress to another....

    Quote Originally Posted by Laka View Post
    OK - thanks for the reply!
    The C6000 have had a booklet trimmer so that was easy to change , but did not have the two-way trimmer/knife and this one don´t show up on the screen ?
    How do a know what is the latest firmware ( if this is the problem) or how to flashed C1 firmware to the latest versions.
    Thanks for any reply!
    Regards

    Check Required to use with the Fore-edge Booklet Trimmer
    Check that software of the following machines support two-knife booklet trimmer-A1.
    • Printer
    • Finisher
    • Fore-edge Booklet Trimmer
    If the combination of software version is not correct, all the machines cannot be booted correctly.




    The C6000 firmware files you have downloaded for registration into service support tool, inside it's folder are the executable firmware data files for both the trimmer C1 and the 2knife trimmer are created.
    These files are not registered in service support tool with other files.
    They are located in Printers Firmware Folder see example pic
    Trimmer Firm Location.jpg

    See firmware procedure pdf's:






    Two Knife A1__Set.jpg

    Attached Files Attached Files
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Technician
    Join Date
    Nov 2015
    Location
    stockholm
    Posts
    18
    Rep Power
    4

    Re: Move booklet trimmer from one Imagepress to another....

    Ok - thanks, we will look at this "after work". .!
    Will come back !
    Thanks!


  6. #6
    Technician
    Join Date
    Nov 2015
    Location
    stockholm
    Posts
    18
    Rep Power
    4

    Re: Move booklet trimmer from one Imagepress to another....

    Quote Originally Posted by Laka View Post
    Ok - thanks, we will look at this "after work". .!
    Will come back !
    Thanks!
    To make it simple ... can we take the booklet trimmer and twoway knife from the 7000 to the 6000
    or is there something (firmware)that have to be changed in the 6000 ...??


  7. #7
    Service Manager 10,000+ Posts
    Move booklet trimmer from one Imagepress to another....

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: Move booklet trimmer from one Imagepress to another....

    Quote Originally Posted by Laka View Post
    To make it simple ... can we take the booklet trimmer and twoway knife from the 7000 to the 6000
    or is there something (firmware)that have to be changed in the 6000 ...??

    from 7000 to 6000= Yes u Can

    Firmware Support for Trimmer and Knife was automatically included in original production.

    If u need to update firmware for printer and/or
    Trimmer and Knife ---u update Printer first, then follow Trimmer and Knife procedures .
    That way u have matching versions.

    what is your C6000 firmware ver-----
    Service Mode>COPIER> DISPLAY> VERSION
    or

    How to Print a Copy Service Report, or Firmware Version, or P-Print?
    Field Remedy
    1) Go into Service Mode.
    2) Hit Function.
    3) Hit Misc-P.
    4) Hit P-Print.
    5) Hit OK.

    Push the Counter Check button on the control panel, select Device Configuration and Arrow down to Options, here is where the Two Knife Booklet Trimmer will be displayed if detected.

    o

    Did u do this

    To enable the detection of the Two Knife Booklet Trimmer-A1:


    Loosen two screws [1] and remove two screws [2] and remove the connector cover [3] of the upstream Booklet Trimmer.
    Press the "SYS" button on the Service Maintenance Panel to display "S03".



    Turn OFF then ON the Finisher power switch and Restart the Marking Engine. The Two Knife Booklet Trimmer-A1 should now be detected.




    Last edited by teckat; 6 Days Ago at 06:17 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Technician
    Join Date
    Nov 2015
    Location
    stockholm
    Posts
    18
    Rep Power
    4

    Re: Move booklet trimmer from one Imagepress to another....

    Thanks again för the reply!
    We will check this asap tomorrow when back on office.
    Let you know if we managed to swop over ....
    Regards


  9. #9
    Technician
    Join Date
    Nov 2015
    Location
    stockholm
    Posts
    18
    Rep Power
    4

    Re: Move booklet trimmer from one Imagepress to another....

    Have now swop the trimmer and two-way knife to the C6000 and it works just fine !!
    Have to move also the booklet trimmer. The one on the C6000 did have different firmway, so it did not work .

    Thanks "teckat" for all help and support.

    Now a new question ..
    Can we also move a B1 Perfekt Binder from C7000 to C6000 the same way, or is there some other software /firmware necessary for that
    Regards
    Lars


  10. #10
    Service Manager 10,000+ Posts
    Move booklet trimmer from one Imagepress to another....

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: Move booklet trimmer from one Imagepress to another....

    Quote Originally Posted by Laka View Post
    Have now swop the trimmer and two-way knife to the C6000 and it works just fine !!
    Have to move also the booklet trimmer. The one on the C6000 did have different firmway, so it did not work .

    Thanks "teckat" for all help and support.

    Now a new question ..
    Can we also move a B1 Perfekt Binder from C7000 to C6000 the same way, or is there some other software /firmware necessary for that
    Regards
    Lars


    setting in Copier>Option

    see page 35
    Perfect Binder B 1.pdf

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here