Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2012
    Location
    Carlisle
    Posts
    104
    Rep Power
    25

    Fiery install Canon c7055

    Hello.

    My machine has a fiery on the back of the unit but it doesn't seem to be installed correctly. It's all plugged in and connected to the copier but there doesn't seem to be any options on the control panel to access the settings. When it's connected to the network the machine picks up what I assume is the fiery ip address of 10.x.x.x but I can't find the actually address of the machine and using a network scanner doesn't locate the machine either.

    Is there a "factory reset" I can perform on the fiery to reinstall it on the machine if not any suggestions as to why I can't see the fiery.

    Thanks
    Chris

  2. #2
    Service Manager 10,000+ Posts
    Fiery install Canon c7055

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Fiery install Canon c7055

    Quote Originally Posted by chrisio View Post
    Hello.

    My machine has a fiery on the back of the unit but it doesn't seem to be installed correctly. It's all plugged in and connected to the copier but there doesn't seem to be any options on the control panel to access the settings. When it's connected to the network the machine picks up what I assume is the fiery ip address of 10.x.x.x but I can't find the actually address of the machine and using a network scanner doesn't locate the machine either.

    Is there a "factory reset" I can perform on the fiery to reinstall it on the machine if not any suggestions as to why I can't see the fiery.

    Thanks
    Chris



    imagepass A1 install

    Dropbox - Image PASS A1 Installation Procedure.pdf




    A1.jpg

    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Main Menu.jpg



    At the Main menu, press [Printer].
    Press [Printer Status/Settings].
    At the Languages Setup screen, select the name of
    the language you want to use, and then select OK.
    Wait a few minutes.


    Input of password=
    Fiery.1


    In response, the machine will automatically show the
    Settings menu.
    Be sure to at least select the following
    and make the appropriate settings in the indicated order:
    [Server Setup], [Network Setup], and [Printer Setup].
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2012
    Location
    Carlisle
    Posts
    104
    Rep Power
    25

    Re: Fiery install Canon c7055

    Hi.

    Thanks very much for the manual. I have confirmed that everything is correctly connected and the fiery powers up with the status LED's showing 00 which means its powered up and ready. Yet there is no "printer" menu displayed on the screen.

    What would be my next step be?

    Thanks for your continued help.

    CHris

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2012
    Location
    Carlisle
    Posts
    104
    Rep Power
    25

    Re: Fiery install Canon c7055

    Hi.

    Ok - so I am a bit stupid! checked again and it turns out the option wasn't set in the service menu - I now have a fully working fiery. Thanks for the manual with out it I would never have known to check the setting in service menu.

  5. #5
    Service Manager 10,000+ Posts
    Fiery install Canon c7055

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Fiery install Canon c7055

    Quote Originally Posted by chrisio View Post
    Hi.

    Ok - so I am a bit stupid! checked again and it turns out the option wasn't set in the service menu - I now have a fully working fiery. Thanks for the manual with out it I would never have known to check the setting in service menu.



    The Dude.jpgwelcome~~~~~~~~~~~~~~~~~~~~~
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Geek Extraordinaire 2,500+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    3,949
    Rep Power
    126

    Re: Fiery install Canon c7055

    Glad it’s working.

    Just as a piece of additional info, the Ethernet connection between the Fiery and the copier is a crossover cable. Neither of the two are able to automatically adjust for a normal, straight-through cable.

    Secondly, the IP adresses for this connection are locked at 10.255.255.1 for the Fiery, and 10.255.255.2 for the copier.

    Just for curiosity, I once put a hub in between, plugged in my notebook with the IP of 10.255.255.3, and watched the activity between them with Wireshark.

    OK, I know I’m a geek, but it was quite interesting.
    “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here