i have a one color density problem.
only black color has dots on the print.
is there any way to fix without changing starter...
supplying toner via
IMG_5572.jpg
i have a one color density problem.
only black color has dots on the print.
is there any way to fix without changing starter...
supplying toner via
IMG_5572.jpg
If gradation and full calibration and other stuff did not help then probably not. It's look like pure starter in black developer.
Folow the procedure with new starter!
FUNCTION > INSTALL > AINR-OFF; then, enter '1' and press the OK key
Bk developing assembly: COPIER > FUNCTION > INSTALL > INISET-K
Execute the following Service Mode: COPIER > FUNCTION > MISC-P > P-PRINT; then, store the outputpapers. If there is any previous P-PRINT output, replace it with the new one.
Restart machine.
Escape the Service Mode and select User Mode > Auto Gradation Correction. Execute auto gradation correction(full adjust) according to the instruction on the display.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Bookmarks