Canon IR ADV C9060 Pro printing not straight.

[Cmp4you]

Hello guys,

I have always thought our cutting machine had to be recalibrated, because every cutting wasn't right. On one side it was about 1.5mm off, everytime.
Today I measured the distance between the document content and the paper edge and it turned out that there is a difference of 1.5mm on the long side. So it seems the printing is off. Is there a way for me to fix this problem?

Thank you for your help!

[zoraldinho]

Can you post a sample?

[roho]

Is this from all trays consistently, or are the results different from each tray? Are the images crooked in any way, or is this just a question of registration? There are quite a few adjustments available depending on the type of issues and a thorough procedure to bring these to spec.