Wrinkle tailing page

[khattab.al.masry]

We face problem with our imagepress c1+
That wrinkled tail page
We enter the correct madia
And that done with coated A3
But with coated A4 works fine no problem
We replaced pad pressure and oil roller and fixing belt
Is there something we missed?
Thanks in advance

Sent from my SM-J700H using Tapatalk

[guitar9199]

Are you hearing any thumping noise from your fuser? You MIGHT have a worn fixing drive gear... there was an issue a while back where the gears were failing at around 50-70K pages. Also, be sure to check and see that you did not accidentally throw away the plastic spacer stuck to the bottom of the pressure plate if you have already replaced the pad.

[khattab.al.masry]

Thanks every body here
The issue solved by replacing pad pressure and pad cover as that mentioned in service manual

Sent from my SM-J700H using Tapatalk