Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts onlyinnewfoundland's Avatar
    Join Date
    Apr 2013
    Posts
    154
    Rep Power
    11

    Question iR-ADV 8095 E061

    Getting an E061-0101

    Replaced drum blade, primary corona, pre-transfer corona, cleaned slit glass.

    Machine was used, purchased through some re-seller and delivered to customer. He bought two of them, both approx 400-500k.

    No real issues with machines, other than the fact that one of them conveniently had potential control disabled in service mode. Only noticed after I started digging to find the solution to a problem where customer was getting darker image on one side of prints.

    This guy only prints 11x17 colored paper. He prints about 60k a month. Machine is used for one day a week to run off a newsletter on 11x17 duplex.

    Am I right in assuming I should maybe replace the potential control assembly here? Looks like the re-seller wasn't honest about it working 100% before we received it.

    I replaced the coronas two weeks ago - no run over xmas break. I put potential control back on, everything seemed normal. He calls me yesterday saying code is on machine again. I walked him through how to turn off potential control in service, now he's getting the dark area. Sometimes it will lessen if you run wire-clean.

    Something weird happening.

    I would swap entire AP-kit w/ from the other unit on site, but it is typically in use while I am there looking at the other machine.

    Drum appears to be original to machine - beginning to wonder if time in storage + age has deteriorated the drum now that he is running it all in one shot with a fair amount of coverage.


    This guy has no cell service in front of his machines and he's 30 minutes out of town, only runs the machine once a week lol


  2. #2
    Service Manager 10,000+ Posts
    iR-ADV 8095 E061

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,252
    Rep Power
    216

    Re: iR-ADV 8095 E061

    check in service mode, under COPIER>DISPLAY>DPOT, see if it indicates the DPOT values displayed.


    is the pre exposure LED turning on

    check for blown fuses on Main Driver PCB

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Nov 2015
    Posts
    24
    Rep Power
    5

    Re: iR-ADV 8095 E061

    Quote Originally Posted by teckat View Post
    check in service mode, under COPIER>DISPLAY>DPOT, see if it indicates the DPOT values displayed.


    is the pre exposure LED turning on

    check for blown fuses on Main Driver PCB

    Previous weekend i had this error on IR5055N. When i replace drum cleaning blade i (by accident) disconnected the pre-exposure LED.


  4. #4
    Service Manager 10,000+ Posts
    iR-ADV 8095 E061

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,252
    Rep Power
    216

    Re: iR-ADV 8095 E061

    Quote Originally Posted by apoxi View Post
    Previous weekend i had this error on IR5055N. When i replace drum cleaning blade i (by accident) disconnected the pre-exposure LED.


    Two Different Animals 🐭 🐼

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here