Results 1 to 4 of 4

Thread: help

  1. #1
    Technician
    Join Date
    Dec 2008
    Location
    modrica
    Posts
    10
    Rep Power
    32

    help

    Hello, I need help. When I print using duplex on ir2870 there is quality problem. Please see atachment pic. I marked my problem with pencil. If someone know how to get it right please help.
    Thanks
    Attached Files Attached Files

  2. #2
    Service Manager 5,000+ Posts
    help

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: help

    That type or blurr on the prints is usually causes by the fuser. Try replacing the fuser sleeve.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    Technician
    Join Date
    Dec 2008
    Location
    modrica
    Posts
    10
    Rep Power
    32

    Re: help

    I replace fuser sleeve few days ago. Its only hapening when use duplex. One side copy/print is fine. When use a4r paper position there is no problem even with duplex.

  4. #4
    Service Manager 1,000+ Posts
    help

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    1,090
    Rep Power
    41

    Re: help

    Turn your paper to LT-R format and see if the problem goes away. If it does, it could be related to the Right Door assembly, the mylars by the registration rollers or the static charge eliminator.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here