We faced problem when shutdown canon imagepress c 6010 after long press with the shutdown switch
the following message appear.
have anyone face like this problem?
Thanks in advance.20180124_150158.jpg
Sent from my SM-J700H using Tapatalk
We faced problem when shutdown canon imagepress c 6010 after long press with the shutdown switch
the following message appear.
have anyone face like this problem?
Thanks in advance.20180124_150158.jpg
Sent from my SM-J700H using Tapatalk
In some cases, when the shutdown sequence is initiated the printer main switch will not turn off automatically.
The printer will indicate on the display to "turn off the main power".
Just like your posted picture.
One Solution :
in this case, it wasfound that one of the connectors between the power supply unit and the main unit was not plugged in and causing this issue. after reconnecting the connector, the printer would shutdown the main power automatically during the shutdown sequence.
See pic link for connections.
Dropbox - 83867_2.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I have 2 that do this. Black connector is plugged in. I think there is a service mode that does it, just not sure which one.
- When turning OFF the main power switch, hold down the control panel power switch for 3 sec or more. By doing so, the shut-down sequence activates, and the
main power will go off automatically.
- Be sure to operate the main power switch while the execution/memory lamp is OFF.
- Do not turn off the main power switch while downloading otherwise it may cause the machine failure.
- If turning off the main power switch while the cassette heater switch/environment heater switch is activated, power is distributed to each heater.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Thanks_Pizza Man .jpgwelcome
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks