Good evening!
I am asking for help to solve my E0003-0002 error problem.
I have a Canon IR 2880i copier that has a code E0003-0002.
I changed the fixing unit (oven) and the problem still persists!
Help me solve
Good evening!
I am asking for help to solve my E0003-0002 error problem.
I have a Canon IR 2880i copier that has a code E0003-0002.
I changed the fixing unit (oven) and the problem still persists!
Help me solve
I guess you reset the code in service mode after you replaced the fixing film ass'y?
There is a known issue with the door switch, the one at the rear above the fuser, the door hinge plastic cracks so it doesn't make the switch contact.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
this error code brings back nightmares lol .. what we found was the rear bottom door was popping out due to a cracked hinge and causing the interlock switch SW3 to disengage without the door open sensor knowing .. there for causing e0003 because there was no power going to the fixing unit.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks