Adding an Firmware to SST

[oxzz]

hello, i have bought an Firmware for IR ADV 6075, but i got nothing when adding them to SST V4.81E
here my step:

1. i add the folder where i save the firmware, but in the left panel they have RED font, what is this mean?

sst2.jpg

2. after that, i back to home menu, still nothing on Model List
sst1.jpg

3. when i try add the firmware again, they have show on left panel, but still nothing in the Mode List
sst3.jpg

any idea about this?

[teckat]

hello, i have bought an Firmware for IR ADV 6075, but i got nothing when adding them to SST V4.81E
here my step:

1. i add the folder where i save the firmware, but in the left panel they have RED font, what is this mean?

sst2.jpg

2. after that, i back to home menu, still nothing on Model List
sst1.jpg

3. when i try add the firmware again, they have show on left panel, but still nothing in the Mode List
sst3.jpg

any idea about this?

================================================== ===========================

Go to location of downloaded zip file (do not unzip it) just copy and past into the SST FILES Folder location

C:\Canon File Folder\SST System Software Folder\SST Files

Now create a folder called iA6075_V2_v51.01.01

Unzip the SST_iA6075_V2_v51.01.01 file into this folder

Then open SST --select register> open the C:\Canon File Folder\SST System Software Folder\SST Files
Scroll to the SST_iA6075_V2 51.01.01> highlight to SEARCH > then register

For some reason this firmware will not normally unzip directly into Canon File Folder\SST System Software Folder\SST Files for SST to recognize/// without creating that folder,

SST 1.jpg

[oxzz]

================================================== ===========================

Go to location of downloaded zip file (do not unzip it) just copy and past into the SST FILES Folder location

C:\Canon File Folder\SST System Software Folder\SST Files

Now create a folder called iA6075_V2_v51.01.01

Unzip the SST_iA6075_V2_v51.01.01 file into this folder

Then open SST --select register> open the C:\Canon File Folder\SST System Software Folder\SST Files
Scroll to the SST_iA6075_V2 51.01.01> highlight to SEARCH > then register

For some reason this firmware will not normally unzip directly into Canon File Folder\SST System Software Folder\SST Files for SST to recognize/// without creating that folder,

SST 1.jpg

still same result,
the Left panel with RED font i got .
sst.jpg

can you share the SST V4.74 ? i want to try using different SST,
i have try adding other firmware like IR ADV 40xx, still got same result.

[teckat]

Make sure u have installed only one version of SST on laptop/PC.

Never seen red fonts in that left side menu.
When u open the 6075 firmware folder do u see all the listed firmware in it ??

[teckat]

Make sure u have installed only one version of SST on laptop/PC.



Your pic shows 74 registered files and a OK in menu ?

[oxzz]

Make sure u have installed only one version of SST on laptop/PC.

Never seen red fonts in that left side menu.
When u open the 6075 firmware folder do u see all the listed firmware in it ??

yes, i see it all .

Make sure u have installed only one version of SST on laptop/PC.



Your pic shows 74 registered files and a OK in menu ?

i am sure i only have SST 4.81Er
yes the pic shows 74 registered firmware and OK menu, after i click OK the SST back to Home Menu.

[teckat]

yes, i see it all .



i am sure i only have SST 4.81Er
yes the pic shows 74 registered firmware and OK menu, after i click OK the SST back to Home Menu.

---

uninstall the SST in Windows > then go into folder C:\Canon File Folder\Service Support Tool Folder and Re-install it.

Re-open SST
then go select >
1.Delete Firmware
2.Select the 6075 firmware
3.Check all boxes
4.Select Remove
5.Then select REMOVED CONFIRMED BOX on lower right menu
6.Then select OK


SST---.jpg

================================================== =========================

Now go and try to Register the 6075
sst---1.jpg