Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Dec 2017
    Location
    North NJ
    Posts
    27
    Rep Power
    13

    Jam 1F58 Canon Saddle Finisher AJ2

    Hello,

    Can someone help us with Jam 1F58 that we are getting on Saddle Finisher AJ2 when we try to print a booklet ? The booklet stops at the saddle output tray.

    Thank you in advance !
    Attached Images Attached Images

  2. #2
    Service Manager 10,000+ Posts
    Jam 1F58 Canon Saddle Finisher AJ2

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Jam 1F58 Canon Saddle Finisher AJ2

    Jam code 1F58 is a "Detection of disengagement of the Sensor Saddle Fold Roller" sensor PS124 (WG8-5848-000) Saddle folding roller HP sensor.
    Location of the sensor can be found in the Saddle Finisher AJ-2 service manual on page 5-58.


    Saddle Finisher AJ-2displays 1F58 jam code when making booklets.

    Example of Problem :
    When running booklets of 11X17 or larger through the saddle finisher, it will make the booklet , then crease the edge. However,the booklet will not fully drop onto the tray conveyor belt and will cause an 1F58 jam code.

    Cleaned the fold rollers, feed rollers and pressure rollers, replaced HP sensor PS109, replaced the saddle finisher driver PCB, cut wire ties on the sensor harness and performed the sensor init adjustment with no avail.


    Solution :
    After swapping out rollers, finisher and saddle finisher pcb's, photo sensors, different drive assemblies it was found that the DC stepping motor M104 (FK2-1732-000) was causing the issue.
    Once the motor was replaced booklets were able to print out and fall onto the conveyor belt tray.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Dec 2017
    Location
    North NJ
    Posts
    27
    Rep Power
    13

    Re: Jam 1F58 Canon Saddle Finisher AJ2

    Quote Originally Posted by teckat View Post
    Jam code 1F58 is a "Detection of disengagement of the Sensor Saddle Fold Roller" sensor PS124 (WG8-5848-000) Saddle folding roller HP sensor.
    Location of the sensor can be found in the Saddle Finisher AJ-2 service manual on page 5-58.


    Saddle Finisher AJ-2displays 1F58 jam code when making booklets.

    Example of Problem :
    When running booklets of 11X17 or larger through the saddle finisher, it will make the booklet , then crease the edge. However,the booklet will not fully drop onto the tray conveyor belt and will cause an 1F58 jam code.

    Cleaned the fold rollers, feed rollers and pressure rollers, replaced HP sensor PS109, replaced the saddle finisher driver PCB, cut wire ties on the sensor harness and performed the sensor init adjustment with no avail.


    Solution :
    After swapping out rollers, finisher and saddle finisher pcb's, photo sensors, different drive assemblies it was found that the DC stepping motor M104 (FK2-1732-000) was causing the issue.
    Once the motor was replaced booklets were able to print out and fall onto the conveyor belt tray.
    I did clean a few HP sensors and it start working properly again. Is there anyway I can the AJ2 service manual ? I found only AB2 which was quite similar to my AJ2.

    Thanks Teckat !


    Sent from my iPhone using Tapatalk

  4. #4
    Service Manager 10,000+ Posts
    Jam 1F58 Canon Saddle Finisher AJ2

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Jam 1F58 Canon Saddle Finisher AJ2

    Quote Originally Posted by proditus View Post
    I did clean a few HP sensors and it start working properly again. Is there anyway I can the AJ2 service manual ? I found only AB2 which was quite similar to my AJ2.

    Thanks Teckat !


    Sent from my iPhone using Tapatalk

    Check your PM 👮
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Technician
    Join Date
    Dec 2017
    Location
    North NJ
    Posts
    27
    Rep Power
    13

    Re: Jam 1F58 Canon Saddle Finisher AJ2

    Quote Originally Posted by teckat View Post
    Check your PM Jam 1F58 Canon Saddle Finisher AJ2
    Thank you !


    Sent from my iPhone using Tapatalk

  6. #6
    Service Manager 10,000+ Posts
    Jam 1F58 Canon Saddle Finisher AJ2

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Jam 1F58 Canon Saddle Finisher AJ2

    Quote Originally Posted by proditus View Post
    Thank you !


    Sent from my iPhone using Tapatalk

    COLOR HAND.jpgwelcome
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here