Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Oct 2016
    Posts
    37
    Rep Power
    16

    Unhappy Canon IR ADV C9060 PRO - Margin not even on all sides

    Hello,

    as I was trying to print brochures with our Canon IR ADV C9060 PRO, I noticed, that the print margin is not even on all sides of the paper. Some sides have 3mm and some have 4.5 to 5mm. In have uploaded a picture of a demonstration print, where you can also see that the duplex alignment also isn't correct, even though I have done a paper tray alignment right before the print (also checked "paper tray alignment" in the print settings). Furthermore, I uploaded a file where I have written down the measured margins of the sides. The difference of .5 or 1 mm makes it hard for cutting. Is there a way to align the print properly or adjust the tray?

    Would really appreciate your help!
    Attached Images Attached Images

  2. #2
    teacher-guide-expert-guru 2,500+ Posts
    Canon IR ADV C9060 PRO - Margin not even on all sides

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides

    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  3. #3
    Technician
    Join Date
    Oct 2016
    Posts
    37
    Rep Power
    16

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides


    Thank you! I am going to try this out very shortly!

  4. #4
    Technician
    Join Date
    Oct 2016
    Posts
    37
    Rep Power
    16

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides

    So, I have been trying it for the past hour, but the result is 0. I did everything accordingly, but if I put for e.g. +8 it then goes to the opposite of the mark (-8 -->16 steps). And if I change the value of the front side (with the 1) then the back also slightly changes.
    Is there anything else I can do or am I doing something wrong here?

  5. #5
    Service Manager 10,000+ Posts
    Canon IR ADV C9060 PRO - Margin not even on all sides

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides

    Quote Originally Posted by Cmp4you View Post
    So, I have been trying it for the past hour, but the result is 0. I did everything accordingly, but if I put for e.g. +8 it then goes to the opposite of the mark (-8 -->16 steps). And if I change the value of the front side (with the 1) then the back also slightly changes.
    Is there anything else I can do or am I doing something wrong here?


    Print Driver ??

    or from what applications ?
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Technician
    Join Date
    Oct 2016
    Posts
    37
    Rep Power
    16

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides

    Quote Originally Posted by teckat View Post
    Print Driver ??

    or from what applications ?
    Printing from the latest Fiery RIP Driver (Imagepass A1). Gonna have to try it with the inbuild PCL6 driver to see if it is the software.
    Printing out of Adobe Acrobat Pro with Fiery drivers.

  7. #7
    teacher-guide-expert-guru 2,500+ Posts
    Canon IR ADV C9060 PRO - Margin not even on all sides

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides

    I check Print options on imagepass H1.

    Capture.JPG
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  8. #8
    Technician
    Join Date
    Oct 2016
    Posts
    37
    Rep Power
    16

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides

    Quote Originally Posted by zoraldinho View Post
    I check Print options on imagepass H1.

    Capture.JPG
    I have also seen this in my printer options, but the offset differs from first to last page of print. I just had to print a brochure for a client and the x-offset was 0mm at the beginning and 2mm at the 20th brochure.

  9. #9
    teacher-guide-expert-guru 2,500+ Posts
    Canon IR ADV C9060 PRO - Margin not even on all sides

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides

    Now I get it!
    We solve this problem ones, but I do not remember how.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  10. #10
    Technician
    Join Date
    Oct 2016
    Posts
    37
    Rep Power
    16

    Re: Canon IR ADV C9060 PRO - Margin not even on all sides

    Quote Originally Posted by zoraldinho View Post
    Now I get it!
    We solve this problem ones, but I do not remember how.
    Bro! You need to remember it! <3

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here