Canon Ir3045 Faint Copy on Top side

[Brian8506]

Hi
on this moment i also think about toner. The last option change toner and cleanup DP Unit
reinstall new toner pack.
let us see hopefully problem would be solved.
if not i will be back soon
thx

Vacuum dv unit. Then install empty bottle of toner and run a toner-s. This will empty the hopper. Then vacuum dv again completely and dry wipe dv cylinder. Install new toner and toner-s again


Sent from my iPhone using Tapatalk

[copier tech]

Hi
pls see PG 3 test Image
drum have no issue because print is clear ( Already replace with good working canon same mode )
and developer roller toner coating is even ( Already replace with good working canon same mode )
but still same problem

thx

Looking at your PG 3 that too looks faint at one end so you can rule out the scanner. (Assuming you didnt scan this print sample on the copier!?)

Check the drum life, again from your PG 3 I would say you are not using a genuine Canon drum unit c-exv 11/12 ? How about toner genuine?