Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 16
Canon Ir ADV C9060 Pro Smaller Margins
Hello, it is me once again.
I want to get to know the printer a little bit more in-depth, so I read the service manual (service codes and service menu). I came across the settings under Copier -> Adjust -> Blank -> BLANK T,L,R,B
Those should be influencing the borders of the printable area. By default the menu says it should be set to "29". When I checked the settings I saw that they are set for T=94; L=59; R=59;B=59. I changed them to the default of 29, restarted the printer and made a print of a full colored page. But I saw no results. The borders were the same. Then I changed all values to 80 and again, no change. Did I misinterpret the setting or do I have to check another function?
Btw: One border is a bit larger than the other ones, which would make sense when one border is set to 94 and the rest to 59.
Greetings dear technicians
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks