Need a little help from may friends!
Have a ADV skewing image from all drawers like the example is there an ajust for this can not find anything in the service manual
thanks in advance
harryWP_20180221_10_15_27_Pro.jpg
Thanks: 0
Likes: 0
Dislikes: 0
Need a little help from may friends!
Have a ADV skewing image from all drawers like the example is there an ajust for this can not find anything in the service manual
thanks in advance
harryWP_20180221_10_15_27_Pro.jpg
You will not fix this with settings.I would start with the ITB belt. Probably belt swinging.Visually inspect belt when rotating.Also you can make a force stop and check image on drums.If you get false image it's laser issue.If image is ok on drums but not on ITB,replace itb
There is a possibility of laser units also.
Last edited by zoraldinho; 02-21-2018 at 12:08 PM.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Doubt lasers as it is all colors. Seems like a paperfeed issue to me, check the main right door for something askew. Try the bypass tray and see if it is better, has to be a common paper path for the trays. You could also confirm by checking the image on the ITB, run a pg 10 on 11/17 and stop it, if the image is straight on the belt it will be a paper feed issue.
check also from bypass it is the same from all papertrays
thank you at all
Reply With Quote
Bookmarks