Hi every body
i have canon IR adv 6255 its panel hanging all the time
i changed the whole control panel and the main controller 1 with no change
any suggestion i will be appreciated
thanks in advane
Hi every body
i have canon IR adv 6255 its panel hanging all the time
i changed the whole control panel and the main controller 1 with no change
any suggestion i will be appreciated
thanks in advane
Try replacing the HDD and reloading the software (format, then upgrade overwrite all).
That fixed a 62xx that I had with a very slow responding control panel just recently.
The HDD on Canon's appears to hold the machines O/S, so it's pretty critical that the HDD is in good read and write health.
[EDIT]
There is also a bulletin for a modified CPU PCB inside the control panel as well (FM4-9880-000).
I've changed a couple on the C52xx range to fix a freezing control panel / unresponsive touch panel.
Not changed one on a 62xx yet, but it is worth mentioning as well.
Last edited by Cipher; 02-24-2018 at 04:12 PM.
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
You probably put in a panel with old style Control Panel Pcb again. Order modified pcb and upgrade firmware
Part number is FM1-U976 for improved Control Panel PCB
Bookmarks