Thanks:
0
Likes:
0
Dislikes:
0
-
-
Re: Canon ir 2520 jam 0108
Jam code 0108 is occurring.
Is the #2 Delivery Solenoid SL5 in the SECOND DELIVERY FRAME ASSEMBLY energizing. ???
If SL5 is held down in the energized position does the paper pass through fine to the exit of the machine.??
If not;
First replace SL5 , then check operation
May need to replace SECOND DELIVERY FRAME ASSEMBLY.
Try and reseat Connector J220 on the DC Controller PCB.
May need to replace Engine Controller PCB / DC Controller PCB
.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Field Supervisor
500+ Posts
- Rep Power
- 34
Re: Canon ir 2520 jam 0108
[QUOTE=teckat;596389]Jam code 0108 is occurring.
Is the #2 Delivery Solenoid SL5 in the SECOND DELIVERY FRAME ASSEMBLY energizing. ???
If SL5 is held down in the energized position does the paper pass through fine to the exit of the machine.??
If not;
First replace SL5 , then check operation
May need to replace SECOND DELIVERY FRAME ASSEMBLY.
Try and reseat Connector J220 on the DC Controller PCB.
May need to replace Engine Controller PCB / DC Controller PCB
thank you , for ur reply i noticed today that the problem occur as u said on the soleiond cos i tried to put a small paper to keep it up the paper rasid up
Distinguished road makes you jewel in rough
-
Field Supervisor
500+ Posts
- Rep Power
- 34
Re: Canon ir 2520 jam 0108
The jam appeard 0109 instead 0108 ,i made everything the jam appear some times after 1 copy or print and some time it work normally , i tried 1st cast ,2nd cst ,bypass and same problem i replaced the unit that located above the duplex. And still the same need ur help
Distinguished road makes you jewel in rough
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks