Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 16
Re: Help with IRA C7260 Network setup
Hi I tried all software and I still cannot get access to the image pass is there a way to do a hardware reset? I see 2 dip switches by the diagnostic LED
Thanks
-
Technician
- Rep Power
- 13
Re: Help with IRA C7260 Network setup
unfortunately that is not it. hopefully someone on here will have the correct images for you.
-
Trusted Tech
50+ Posts
- Rep Power
- 14
Re: Help with IRA C7260 Network setup
If Fiery.1 doesn't work, leave the password field blank, try that, failing that its been changed by some knucklehead and you will need system disk to reinstall system software on the rip. Double check crossover cable from rip to copier.
-
Trusted Tech
50+ Posts
- Rep Power
- 16
Re: Help with IRA C7260 Network setup
Hi thank you for the help do have have a part number for the software for the rip? reinstall system software I tested the crossover cable on my fluke cable analyzer and it comes back good
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks