Help with IRA C7260 Network setup

[QC91]

Hi, we have IRA C7260 with imagePASS-A2 we can't find any of the TCP-IP address, we have ethernet plug into the LAN on the imagePASS-A2 and have patch cable coming from the imagePASS-A2 to the LAN on the 7260 we also tried to directly Plug the RJ-45 on the IRA 7260 but can't get any IP address I will attach some screenshots printout any help would be appreciated


7260.pdf


IMG_20180322_174742.jpgIMG_20180322_175739.jpgIMG_20180322_175747.jpg

[zoraldinho]

LAN cable into rip.
Cross cable rip to copier.
In service mode set attached rip.(COPIER > OPTION > INT-FACE > IMG–CONT) to 3.
Go to printer settings.

[QC91]

Hi, Thanks for the reply, I have everything set up in your Instructions but still can't get to IP address here are some photos

IMG_20180323_105024.jpgIMG_20180323_104657.jpg

[nicko6113]

there should be a setting under printer settings. because there is an imagepass you have to set the ip address there.

[QC91]

Hi, see the setting for the network but it does not show the ethernet driver setting I only see this

IMG_20180322_175739.jpgIMG_20180322_175739.jpg

[nicko6113]

do you have a menu for printers that's not in the system menu? on my C5180 there is a setting under a printers tab.

[QC91]

Hi, nicko6113 do you have a photo of the menu? on C7260, I did the following (Settings/Registration). Press [Preferences]. Press [Network]. Press [Confirm Network Connection Set. Changes]. Press [On] [OK]. but there is no "Ethernet Driver Settings" I only see this in the photo
IMG_20180322_175739.jpg

[QC91]

is there a way to log in via USB to see if the network settings can be changed?

[zoraldinho]

Hi, Thanks for the reply, I have everything set up in your Instructions but still can't get to IP address here are some photos

IMG_20180323_105024.jpgIMG_20180323_104657.jpg

[QC91]

Hi, Thanks, I have never setup Fiery, I see there are 2 dip switches should they be set to 1? IMG_20180323_143023.jpg