hi guy...........Please help, i have problem with canon ir 2202 when i print or copy it make Dark copy & print with small dark dots
As you see on picture
1 001.jpg
hi guy...........Please help, i have problem with canon ir 2202 when i print or copy it make Dark copy & print with small dark dots
As you see on picture
1 001.jpg
And what have you done so far? I would hope you looked at the drum first
dots.jpg
Cleaning the Photosensitive Drum
If the surface of the photosensitive drum is soiled, wipe it with a flannel cloth coated
with toner. (Do not use paper, lint-free or otherwise.)
---Do not dry wipe it nor use solvent.
---Further, never use drum cleaning powder.
DRUM Bias is Shot ?
Developing Assembly Bias ?
GPR-6 DRUM====55,000 copies estimate life at 6% text coverage
are u using Canon OEM toner and drum
Last edited by teckat; 04-02-2018 at 05:55 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
If the print has spots ,pull the drum unit out and see if the drum is clean after making a print. If the surface is dirty(should have a clean surface for next charging cycle),replace the drum unit. Drum count? Post a print with an image on it
Bookmarks