Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
CLC 3200 - Stripe down copy
Hi Guys.
I've got a problem where after about 20 sheets of paper go through the machine, a line begins to appear along the sheet. If I allow it to continue the line becomes a stripe about 5 - 10mm wide.
If I take the cleaning blade out and clean it, the machine runs clean again for about another 20 sheets.
I've removed and cleaned the ITB, but it continues to happen. If I take the ITB unit out at the same time, there is a line of toner on it which again is 5 - 10mm wide and corresponds to the mark that appears on the sheets.
There are no visible marks on the ITB that would suggest a problem with it.
Any help would be appreciated
-
Re: CLC 3200 - Stripe down copy
Sounds like a drum unit, when they go they begin to make lines on prints. I would try a drum of the offending color.
-
Re: CLC 3200 - Stripe down copy
Could also be the cleaning assembly. If the blade is starting to turn yellow or if it's old, replace it.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks