Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Dec 2017
    Location
    JACKSONVILLE
    Posts
    3
    Rep Power
    0

    IR-C1022i firmware needed

    Hello- can someone send / point me to a download for C1022i firmware?

    I have an old C1022i at home that has worked great for 7 or so years, but it's now stuck at start up with a message:

    "Network download available" (and then the IP address of the MFP)

    It won't let me do anything- I can't get into service mode or get to the home screen. I believe this might be (at least temporarily) resolved by loading firmware, but I don't have access to it. (my dealership stopped selling / supporting Canon a few years ago)

    Thanks in advance!

  2. #2
    Service Manager 10,000+ Posts
    IR-C1022i firmware needed

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: IR-C1022i firmware needed

    C1022 / C1022i / C1030 / C1030iF

    There are two methods of getting the device into Download Mode.

    Method One:

    Press down and hold the number 2 button on the operation panel, then turn on the Main Power switch of the device, while holding down the number 2 button.

    Keep the number 2 button pressed down until the device boots up, and the following display appears:

    Network Download Available

    IP Address: xxx.xxx.xxx.xxx

    The IP Address line, will display the current IP Address configured on the device.


    Method Two:

    Press MAIN MENU button
    Press the number 2 button
    Press the number 8 button
    Press MAIN MENU button
    Select COPIER
    Press OK button
    Select FUNCTION
    Press OK button
    Select SYSTEM
    Press OK button
    Select DOWNLOAD MODE
    Press OK button


    note:
    The device will go into a booting sequence, and after a few moments the device will display the following:

    Network Download Available

    IP Address: xxx.xxx.xxx.xxx

    The IP Address line, will display the current IP Address configured on the device. That will be the IP Address that is to be used to flash the device from the computer.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Junior Member
    Join Date
    Dec 2017
    Location
    JACKSONVILLE
    Posts
    3
    Rep Power
    0

    Re: IR-C1022i firmware needed

    I appreciate the instructions, but it's the actual firmware I need. I am hoping someone will extend a little professional courtesy and send me a link to it.

    Thanks!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here