canon ah-1 puncher

[nicko6113]

i just bought a ah-1 to add on to the finisher-w1. but i think im missing wires. is there just 2 wires that connect the circuit boards together? im contacting where i bought it to see if they have any. and does anyone have a manual for the puncher?

[kuby]

What model does this go on?

[nicko6113]

oh woops. imagerunner c5180

[teckat]

i just bought a ah-1 to add on to the finisher-w1. but i think im missing wires. is there just 2 wires that connect the circuit boards together? im contacting where i bought it to see if they have any. and does anyone have a manual for the puncher?

---

see attach----------------AH1 Install

also
part number for the latch brackets for the Puncher Unit L1/ AH1?



Support, Latch, Front part number 4F3-1006-000
Support, Latch , Rear part number 4A3-4662-000
Below is a picture of the parts manual with arrows pointing to the bracket


Below is a picture of the Puncher cover with an arrow pointing to the harness.-------make sure to not pinch wire harness

[nicko6113]

Thanks for the help. Turns out the company I ordered the punch unit from forgot to send the wires. They are in the mail now.