i just bought a ah-1 to add on to the finisher-w1. but i think im missing wires. is there just 2 wires that connect the circuit boards together? im contacting where i bought it to see if they have any. and does anyone have a manual for the puncher?
i just bought a ah-1 to add on to the finisher-w1. but i think im missing wires. is there just 2 wires that connect the circuit boards together? im contacting where i bought it to see if they have any. and does anyone have a manual for the puncher?
What model does this go on?
oh woops. imagerunner c5180
see attach----------------AH1 Install
also
part number for the latch brackets for the Puncher Unit L1/ AH1?
Support, Latch, Front part number 4F3-1006-000
Support, Latch , Rear part number 4A3-4662-000
Below is a picture of the parts manual with arrows pointing to the bracket
Below is a picture of the Puncher cover with an arrow pointing to the harness.-------make sure to not pinch wire harness
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thanks for the help. Turns out the company I ordered the punch unit from forgot to send the wires. They are in the mail now.
Bookmarks