Canon Ir adv 8105 D1 booklet finisher error E514 -8006 -05

[amitlama_78]

Hi
Im getting this error E514 -8006 -05 on my canon ir adv 8105
I dont have service manual for the finisher if any one could help wuld appreciate.

MyMail Id is Amitlama_78@yahoo.com
Thanks

[teckat]

Hi
Im getting this error E514 -8006 -05 on my canon ir adv 8105
I dont have service manual for the finisher if any one could help wuld appreciate.

MyMail Id is Amitlama_78@yahoo.com
Thanks

---

E514 -8005 -05 = Error in the Gripper Motor (Finisher-D1)
Remedy
1. The connector of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are disconnected.
2. The wiring of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are faulty.
3. The Gripper Position Sensor (S115) is faulty.
4. The Gripper Motor (M117) is faulty.
5. The Finisher Controller PCB is faulty.
Description = The gripper does not come off the Position Sensor when the Gripper Motor has been driven for 3 seconds

Dropbox - Finisher-D1__Booklet_Finisher-D1_SM.pdf