Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Apr 2016
    Posts
    16
    Rep Power
    17

    ligth image ir-adv8585

    Hello everyone.
    I have a problem with an Ira-adv8585 machine.
    The problem is only as a printer, not as a copier.
    The problem is that sometimes it prints little intensity (not always and only with some files, these files have been tested in another machine equal and go well)
    As a copier, she has never had a problem.
    It is the same to print in postcription, VFR or direct printing on a pendrive.
    We have increased the level of intensity as a printer at the user level but sometimes the quality is not good.
    As it does not always happen, we thought there was a temperature problem in the client since in winter there are only between 12 and 16 degrees but now the temperature is normal and still bad.
    In a knowledge base I have seen a similar problem in ir-adv8085 and it is to restore factory data. But my question is if after the reset load the machine backup.
    Thanks for everything.
    Greetings.

  2. #2
    Service Manager 10,000+ Posts
    ligth image ir-adv8585

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: ligth image ir-adv8585

    What is Set up for
    Printing

    imagePass Y1 ?
    Print Kits ?
    Drivers Used ?
    Applications Using ?
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Apr 2016
    Posts
    16
    Rep Power
    17

    Re: ligth image ir-adv8585

    On Friday the problem has been solved.
    I have made a factory reset and with a p-print I have entered the parameters.
    Now with any pdf in usb, PS or VFR the quality is correct.
    Thank you very much.
    regards

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    275
    Rep Power
    28

    Re: ligth image ir-adv8585

    Quote Originally Posted by dracon View Post
    On Friday the problem has been solved.
    I have made a factory reset and with a p-print I have entered the parameters.
    Now with any pdf in usb, PS or VFR the quality is correct.
    Thank you very much.
    regards
    Good innovation!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here