Thanks: 
Likes: 
Dislikes: Any help would be welcome,Canon IR3180 producing blank pages only?,removed delivery tray to check image formation, and theres no image forming on the ITB,also dev units don't appear to be rotating?
Any help would be welcome,Canon IR3180 producing blank pages only?,removed delivery tray to check image formation, and theres no image forming on the ITB,also dev units don't appear to be rotating?
Originally Posted by steve1973
No error codes ?
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Only recent error code was E0732 that was related to paper pickup rollers on cassette one that were worn down and not picking up, new ones fitted and seemed to sort it, but nothing related to this blank page problem.The machine has recently had both cyan and magenta dev units replaced and weirdly since then has made an audible beep? when printing, but has printed ok.This was a couple of weeks ago but now is printing only blank pages,there was no audible beep on the old dev units?.
No image on itb? No errors?
Laser shutter?
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Make sure itb cleaner blade is not stuck against itb. Does itb turn?
Itb is turning fine, have inspected it on start up and noticed that patch images are forming for all colours on the belt ok during startup, but nothing when printing/copying.
U have patch images = means all is turning
so now
Check Secondary Transfer Roller -applies image from ITB to Paper
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I agree.Transfer issue.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Still only have patches formed at startup, have tried printing internal test pages but nothing forming on itb,have still got an audible tone,1 beep for each colour as rotary turns,guess theres no way to print test patches on startup?
Is there a way i can check to see if an image is forming on the drum?
Reply With Quote
Bookmarks