ir adv C5030

[konica7022]

Maybe a stupid question

Wich printer driver are you using ?

Canon UFR II

[lilleputte]

Canon UFR II

If possible try PCL or PS instead of UFR

Skickat från min SM-G930F via Tapatalk

[konica7022]

If possible try PCL or PS instead of UFR

Skickat från min SM-G930F via Tapatalk

PLC driver prints fine but UFR sucks, why is that?

plus i will still appreciate if any one know how to increase brightness from Service mode by playing with Developer /toner settings

[zoraldinho]

PLC driver prints fine but UFR sucks, why is that?

plus i will still appreciate if any one know how to increase brightness from Service mode by playing with Developer /toner settings

There is option in service mode (COPIER > DISPLAY > DENS) Not recomended!
Did you try with gradation correction? Please post PG-10 test.

[JPiek]

I think a PG Type 4 in Bk or Type 14 would tell a lot more about the gradation being correct or not...

[techandtrader]

IME UFR2 is always lighter than the PS Driver. If it really is too dark or darkened and there is a great OEM drum installed and an Undamaged HVT then I would be bringing it back to door specs, cleaning the patch reader and just starting over with a cleaned scanner. Clear IMG Reg too.