HI
I have a canon ir3300.it has a problem with the paper feed assembly in that tray 1and 2 are not lifting.hve changed the sector gear for tray 2 but no luck
HI
I have a canon ir3300.it has a problem with the paper feed assembly in that tray 1and 2 are not lifting.hve changed the sector gear for tray 2 but no luck
those are very difficult to repair. I have two feed assembly's that work good. One is extremely quiet and like new. If you want one LMK I am in USA.
I used to have 100’s of these on my patch, this lifting issue can be caused by a number of reasons.
Best way to diagnose is to remove the cassette unit, take off the sensor board & cover you’ll see many cams, levers & springs etc check that none of the plasic parts have snapped.
Personally I wouldn't bother on this on machine unless you can scorce a replacemnt feed unit.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks