Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Service Manager 1,000+ Posts
    Irc5045 jam code 0103 from tray 4 only


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,323
    Rep Power
    48

    Thumbs up Irc5045 jam code 0103 from tray 4 only

    tray 4 jams at tray 2 registrstion area with jam code 0103. All other tray work great. Frsnk

  2. #2
    Service Manager 10,000+ Posts
    Irc5045 jam code 0103 from tray 4 only

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Irc5045 jam code 0103 from tray 4 only

    Quote Originally Posted by axyun View Post
    tray 4 jams at tray 2 registrstion area with jam code 0103. All other tray work great. Frsnk


    check this connector----------------j3002 intermediate connector between pedestal and engine

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Service Manager 1,000+ Posts
    Irc5045 jam code 0103 from tray 4 only


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,323
    Rep Power
    48

    Re: Irc5045 jam code 0103 from tray 4 only

    Thanks for input Teckat. I am only one servicing machine in last year. Have not removed any connectors except on tray 4 pickup asm which I just changed due to the jamming Customer is over 20 miles away so I want to have a some more input before going back. Frank

  4. #4
    Service Manager 10,000+ Posts
    Irc5045 jam code 0103 from tray 4 only

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Irc5045 jam code 0103 from tray 4 only

    Quote Originally Posted by axyun View Post
    Thanks for input Teckat. I am only one servicing machine in last year. Have not removed any connectors except on tray 4 pickup asm which I just changed due to the jamming Customer is over 20 miles away so I want to have a some more input before going back. Frank
    ��
    0103 Is a Cassette 3 delay
    Delay jam=Cassette 3 pre-registration sensorPS8

    OK
    things to check for a delay jam

    Check the flag operation
    The Cassette 3 Retry Sensor Flag is visible at the middle of the Pickup Roller.

    The Cassette 3 Retry Sensor (PS8) is visible in the Cassette 3 Pickup Assembly.

    : does it happen on all paper sizes
    :did u check tray 3 and 4 operations in I/O - sensor , etc
    : did u swap cassettes ?
    : ? is this jam on copying & driver printing ?
    : ? Is this a constant or intermittent issue ?
    Last edited by teckat; 07-13-2018 at 12:09 AM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Service Manager 10,000+ Posts
    Irc5045 jam code 0103 from tray 4 only

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Irc5045 jam code 0103 from tray 4 only

    0102/0103/0104/0A02/0A03/0A04 Jam Code due to deterioration of noise reduction material on the solenoid in the paper pick-up assembly.

    To reduce noise, the pad [1] is attached to the solenoid (FK2-0408-000) used in the paper pick-up assembly.

    As this pad deteriorates over time, the glue on the double-sided tape may become exposed. If this glue is adhered to the claw [a] of the solenoid, the return motion of the claw is delayed, resulting in a jam.

    iR-ADV C5255 (for CE & Backend)|FAQ
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Service Manager 1,000+ Posts
    Irc5045 jam code 0103 from tray 4 only


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,323
    Rep Power
    48

    Thumbs up Re: Irc5045 jam code 0103 from tray 4 only

    Only jams from tray 4

    all sizes jam from tray 4
    did not do a service mode i/o sensor .----not familiar with procedure
    swapped trays and still jams from tray 4 so not a tray problem
    lams from copying and from printing
    jams every page


    I will remove tray 3 pick up assembly and check solenoid + sensor , flag. If need be I can swap with old tray 4 pickup asm which I removed when replacing with new one. Evident;y i replaced wrong pickup asm but will resolve this and post results. Thank you Teckatfor all the extra info which is very helpful. I have seen that solenoid /felt issue on many machines including brother , HP etc.

  7. #7
    Service Manager 1,000+ Posts
    Irc5045 jam code 0103 from tray 4 only


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,323
    Rep Power
    48

    Thumbs up Re: Irc5045 jam code 0103 from tray 4 only

    It seems the lower door may have been slightly warped due to customer intervention. Noticed when i pressed against it the paper always went through.
    I improvise something with door to cause more pressure and has been working since. Will order new door for next visit..Thank you Techat for all yourhelp and info. Frank

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here