Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Service Manager 1,000+ Posts
    Irc5045 jam code 0103 from tray 4 only


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,218
    Rep Power
    35

    Thumbs up Irc5045 jam code 0103 from tray 4 only

    tray 4 jams at tray 2 registrstion area with jam code 0103. All other tray work great. Frsnk


  2. #2
    Service Manager 10,000+ Posts
    Irc5045 jam code 0103 from tray 4 only

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,603
    Rep Power
    223

    Re: Irc5045 jam code 0103 from tray 4 only

    Quote Originally Posted by axyun View Post
    tray 4 jams at tray 2 registrstion area with jam code 0103. All other tray work great. Frsnk


    check this connector----------------j3002 intermediate connector between pedestal and engine



    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Service Manager 1,000+ Posts
    Irc5045 jam code 0103 from tray 4 only


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,218
    Rep Power
    35

    Re: Irc5045 jam code 0103 from tray 4 only

    Thanks for input Teckat. I am only one servicing machine in last year. Have not removed any connectors except on tray 4 pickup asm which I just changed due to the jamming Customer is over 20 miles away so I want to have a some more input before going back. Frank


  4. #4
    Service Manager 10,000+ Posts
    Irc5045 jam code 0103 from tray 4 only

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,603
    Rep Power
    223

    Re: Irc5045 jam code 0103 from tray 4 only

    Quote Originally Posted by axyun View Post
    Thanks for input Teckat. I am only one servicing machine in last year. Have not removed any connectors except on tray 4 pickup asm which I just changed due to the jamming Customer is over 20 miles away so I want to have a some more input before going back. Frank
    ��
    0103 Is a Cassette 3 delay
    Delay jam=Cassette 3 pre-registration sensorPS8

    OK
    things to check for a delay jam

    Check the flag operation
    The Cassette 3 Retry Sensor Flag is visible at the middle of the Pickup Roller.

    The Cassette 3 Retry Sensor (PS8) is visible in the Cassette 3 Pickup Assembly.

    : does it happen on all paper sizes
    :did u check tray 3 and 4 operations in I/O - sensor , etc
    : did u swap cassettes ?
    : ? is this jam on copying & driver printing ?
    : ? Is this a constant or intermittent issue ?

    Last edited by teckat; 3 Days Ago at 12:09 AM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Service Manager 10,000+ Posts
    Irc5045 jam code 0103 from tray 4 only

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,603
    Rep Power
    223

    Re: Irc5045 jam code 0103 from tray 4 only

    0102/0103/0104/0A02/0A03/0A04 Jam Code due to deterioration of noise reduction material on the solenoid in the paper pick-up assembly.

    To reduce noise, the pad [1] is attached to the solenoid (FK2-0408-000) used in the paper pick-up assembly.

    As this pad deteriorates over time, the glue on the double-sided tape may become exposed. If this glue is adhered to the claw [a] of the solenoid, the return motion of the claw is delayed, resulting in a jam.

    iR-ADV C5255 (for CE & Backend)|FAQ

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Service Manager 1,000+ Posts
    Irc5045 jam code 0103 from tray 4 only


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,218
    Rep Power
    35

    Thumbs up Re: Irc5045 jam code 0103 from tray 4 only

    Only jams from tray 4

    all sizes jam from tray 4
    did not do a service mode i/o sensor .----not familiar with procedure
    swapped trays and still jams from tray 4 so not a tray problem
    lams from copying and from printing
    jams every page


    I will remove tray 3 pick up assembly and check solenoid + sensor , flag. If need be I can swap with old tray 4 pickup asm which I removed when replacing with new one. Evident;y i replaced wrong pickup asm but will resolve this and post results. Thank you Teckatfor all the extra info which is very helpful. I have seen that solenoid /felt issue on many machines including brother , HP etc.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here