Dear all.
I have canon ir 6255 damaged hdd machine. i have replaced the new hdd but no firmware update you can help me. vinhsesco@gmail.com. Thank you very much
Dear all.
I have canon ir 6255 damaged hdd machine. i have replaced the new hdd but no firmware update you can help me. vinhsesco@gmail.com. Thank you very much
Firstly you need to fit the correct HDD, just any hard drive wont work.
We have the firmware on our site below.
Copier Firmware - Canon Firmware, What Is Firmware, Ricoh Firmware
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Did u have an ERROR CODEreplaced the new hdd but no firmware update
explain above u have no firmware / or update failed
HDD needs to be Formatted with SST/or USB--- iRAdvanced 6255 Firmware
The part numbers for the Hard Disk Drive for this series machine have been updated (2015).
The new numbers are as follows:
FK2-9008-000 = iRA 6055 / 6065 / 6075
FK4-1550-000 = iRA 6275 / 6265 / 6255
-----------------------------------------------------------------------------
imageRUNNER ADVANCE 6055 / 6065 / 6075 / 6255 / 6265 / 6275 / 8085 / 8095 / 8105 / 8285 / 8295 / 8205
HD Format Error When trying to format the Hard Drive by holding 2 & 8 down OR single mode through SST, you get an "ERROR" message when executed.
The HD format script resides on the Flash Rom of the machine and can become corrupted. The machine didn't have an error code and would boot up, but would not allow firmware to load because HD Format Error would error. Obtained a new, blank Flash ROM PCB from Hardware Engineering to resolve the issue.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
You need to format hhd, install firmware
Procedure to install USB System Software to a USB Flash Drive
1. Download "USB" System Software for the iR-ADV C6275 Series for example:
iA6275_v18.02.01.zip”
2. Open the “USB_iA6275_v18.02.01” folder and place the “iA6275” Folder and “All HDFormat” files
onto your USB Flash Drive.
3. Done
USB Flash Drive:
Flashing the System Software by use of a USB Flash Drive is supported.
SERVICE MODE > COPIER > FUNCTION > SYSTEM > DOWNLOAD
Select Format first
then ALL
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I also experienced the same thing please send me the IR ADV 6275 firmware.
My email: yeelsee@gmail.com
Thank you very much
Bookmarks