Thanks:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 19
Canon IR1023 paper size detection
Is paper size detected by the exit sensor? I have a machine that gives me intermittent jams and or mostly incorrect paper size after paper exits the machine. Does the same thing whether its in network or not. There is no paper size detect in the cassette.right?
Could be paper feed rollers need replacement.
-
Re: Canon IR1023 paper size detection
I would remove the fuser and check the sensors there and the exit actuator they notoriously hang up
-
Re: Canon IR1023 paper size detection
May sound silly, but check the paper settings in "Settings/Registration". Someone might have changed them. Another thing to check are the pickup (D-Rollers) and the feed/sep rollers. If they're worn, you'll get "Incorrect Size" errors.
-
Re: Canon IR1023 paper size detection
Registration clutch may be hesitating. Print user data list. They're framed and you can see if the registration is varying
-
Trusted Tech
50+ Posts
- Rep Power
- 19
Re: Canon IR1023 paper size detection
thanks for great info . It was feed and separation rollers that were causing enough hesitation to slow paper timing and for some reason stop paper as it entered the fusing unit. thanks
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks