Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22
  1. #21
    Field Supervisor 500+ Posts dan7777's Avatar
    Join Date
    Dec 2012
    Location
    Bristol
    Posts
    680
    Rep Power
    34

    Re: Canon ir adv 8105 dadf tray does not lift

    Quote Originally Posted by amitlama_78 View Post
    hi
    no the green light does not light up when i put paper.
    That is SR1 original sensor
    Service mode, copier>I/o adf feeder P001 to P007 ---P002 bit 1 should be 1 when flag pushed (original present) and 0 with no original.

    I think to get that to lift it has to know there is a piece of paper in tray and green light on top of adf should be green. If that is not working I would guess, bad sensor, bad wiring to board or bad board. I have had people knock the flag out so it was not making the sensor.

  2. #22
    Technician sal's Avatar
    Join Date
    Dec 2011
    Location
    LlOS ANGELES
    Posts
    19
    Rep Power
    25

    Re: Canon ir adv 8105 dadf tray does not lift

    make sure the tray sensor is connected sometimes when we put it back together the connection get pulled off

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here