Hi!
I've got a Perfect Binder-B1 connected to my Canon ImagePress C6000VP and now I get the error code E0005bb-0005-61. Does anyone know what this means?
Regards
Lars
Hi!
I've got a Perfect Binder-B1 connected to my Canon ImagePress C6000VP and now I get the error code E0005bb-0005-61. Does anyone know what this means?
Regards
Lars
see tech pub link-----
Minimizing Error Code E5BB-0005 Caused by Damage to the Spine Bending Sensor Cable (Right) - Revised
Dropbox - E5BB-0005 Tech Pub.pdf
The spine bending motor (left)(M28) and spine bending motor (right)(M29) are driven to move the left spine bending plate and right spine bending plate from
the spine bending closed position to the home position.
2) According to the result of stack thickness detection, the spine bending motor (left)(M28) and spine bending motor (right)(M29) are driven to move the spine
bending plate to the standby position which is away from the stack by the specified distance.
E5BB = Spine bending motor (right) (M29)
0005 --The spine bending home position sensor (right) (S66) and the spine plate pressure
sensor (S69) have turned on simultaneously.
M29.jpg
M29.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thanks for the reply!
Probably seems to be the problem. (has looked inside)
How do you solve this? (we do not have a service panel / card)
Can you change position manually?
Regards
Laka
Bookmarks