Canon iR3045 temperature up to 250 degrees. I change fixing assembly, DC Controller PCB Controller and MAIN POWER SUPPLY PCB ASSEMBLY finish.
Please suggestion for me.
Canon iR3045 temperature up to 250 degrees. I change fixing assembly, DC Controller PCB Controller and MAIN POWER SUPPLY PCB ASSEMBLY finish.
Please suggestion for me.
Are you talking 250 degrees C or F?
Startup Performs the temperature control at 220 deg C for 10 sec.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
imageRUNNER 2230 / 2230G / 2270 / 2830 / 2870 / 3025 / 3030 / 3035 / 3045 / 3530 / 3530G / 3570 / 4570
The Fuser Temperature remains high. In Standby Mode the Fuser Temperature shows Fix-C 228c, Fix-E 211c.
The temperature does not drop. The Fuser unit has been replaced and error history does not show any Fuser Errors.
Solution :
In this case doing a DC Controller Clear and re-entering the door specs resolved the problem.
Service Mode > Copier > Function > Clear > DC CON > OK
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks