Customer wants me to remove the Finisher from the machine.. not sure how to do that, or if there is any programming that needs to be done. Also, I assume I have to add some kind of Exit Tray to it afterwards?
Thanks in advance,
OC
Thanks: 0
Likes: 0
Dislikes: 0
Customer wants me to remove the Finisher from the machine.. not sure how to do that, or if there is any programming that needs to be done. Also, I assume I have to add some kind of Exit Tray to it afterwards?
Thanks in advance,
OC
seems like there are a couple sensor arms that are removed and the little tray to support the paper to duplex. I cant remember if any covers are removed in the process. I used to keep a set or two in case we removed a finisher, but not from one of these. Oh and no programing should need to be done afterwards.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Originally Posted by Oystercopy
to remove the finisher you need to remove the bridge unit as well. in most cases.
the bridge unit carries the paper to the finisher.
Does anyone have the INSTALLATION GUIDE (or whatever Canon calls it) to add/remove this finisher? And/or a Part number list?
OC
Maybe you missed it but TECKAT just left the serv manual (it has an installation chapter) just above in "ADOBE DOCUMENT CLOUD" link,
is it an external or internal finisher ?
It's the INTERNAL finisher, and NO, missed the link above!
OC
Adobe Document Cloud
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Reply With Quote
Bookmarks