IMG-20181218-WA0001.jpgi have a canon adv 6055 with a bold strip.l changed the belt,the cleaning blade,the bearings ,the transfer roller and the problem stand still.can anyone help me?thanks
IMG-20181218-WA0001.jpgi have a canon adv 6055 with a bold strip.l changed the belt,the cleaning blade,the bearings ,the transfer roller and the problem stand still.can anyone help me?thanks
Is the blur on the lead edge? Try both corona assemblies.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
changed coronas wires and cleaned up.still the same.
Problem solved when l find a loose belt near from transfer belt gear.figure 330 item 72 XF2-1606-260 3 BELT, TIMING, COGGED.
lI do not know how it happened, but the machine is used and I do not know the history.
Last edited by rvzanini; 12-19-2018 at 09:18 PM.
Is this on every page or only the first print? Looks double sided does it only happen on the one side?
Whatever
Bookmarks